Product Description
GTX series is designed to resist deflection, and to provide accurate pressings and longer die life, even at full tonnage loads. The heavy, one-piece welded steel frame is fully stress relieved to provide a stable base for the GTX series presses.
If unequal loads are applied across the slide, full oil pressure form the overload system is applied where required to retain the parallelism between slide plate and bolster for consistent quality of pressings and extended tooling life.
Product Specification
| Model | GTX-160 | GTX-200 | GTX-250 |
|---|
| S | H | S | H | S | H |
|---|
| Capacity (Tons) |
160 |
200 |
250 |
| Rated tonnage point (above B.D.C.) (mm) |
6 |
3 |
6 |
3 |
7 |
3 |
| Stroke length (mm) |
180 |
130 |
250 |
150 |
280 |
170 |
| Strokes per minute (SPM) |
30-55 |
40-85 |
20-50 |
35-70 |
20-40 |
30-60 |
| Die height (S.D.A.U.) (mm) |
450 |
400 |
500 |
450 |
550 |
450 |
| Maximun upper die weight (kg) |
1200 |
1500 |
2200 |
| Slide adjustment (mm) |
100 |
120 |
120 |
| Bolster area (LRxFB) (mm) |
1800x760 |
2200x940 |
A |
2500x1000 |
| B |
2800x1000 |
| Bolster thickness (mm) |
150 |
160 |
160 |
| Slide area (LRxFB) (mm) |
1600x650 |
1850x750 |
A |
2100x900 |
| B |
2400x900 |
| Slide plate thickness (mm) |
70 |
95 |
95 |
| Side opening (mm) |
700x450 |
900x600 |
900x600 |
| Main motor |
HPxP |
15x6 |
20x6 |
25x6 |
| KWxP |
11x6 |
15x6 |
19x6 |
| Slide adjusting motor |
HPxP |
1x4 |
2x4 |
2x4 |
| KWxP |
0.75x4 |
1.5x4 |
1.5x4 |
| Air pressure (kg/cm2) |
5 |
5 |
5 |
| Die cushion |
Type |
2-Pad-2-Cylinder |
| Capacity (ton) |
6.3x2 |
10x2 |
14x2 |
| Stroke length (mm) |
70 |
80 |
100 |
| Pad area (mm) |
410x260x2pcs |
540x350x2pcs |
640x470x2pcs |
| Model | GTX-300 | GTX-400 | GTX-500 |
|---|
| S | H | S | H | S |
|---|
| Capacity (Tons) |
300 |
400 |
500 |
| Rated tonnage point (above B.D.C.) (mm) |
7 |
3 |
7 |
3 |
7 |
| Stroke length (mm) |
300 |
170 |
300 |
170 |
350 |
| Strokes per minute (SPM) |
20-35 |
30-50 |
20-35 |
30-50 |
20-30 |
| Die height (S.D.A.U.) (mm) |
550 |
450 |
550 |
450 |
1000 |
| Maximun upper die weight (kg) |
A |
2400 |
A |
2400 |
4000 |
| B |
B |
| C |
3200 |
C |
3200 |
| D |
D |
| Slide adjustment (mm) |
120 |
120 |
120 |
| Bolster area (LRxFB) (mm) |
A |
2500X1000 |
A |
2500X1000 |
3200x1300 |
| B |
2800X1000 |
B |
2800X1000 |
| C |
3100X1000 |
C |
3100X1000 |
| D |
3400X1000 |
D |
3400X1000 |
| Bolster thickness (mm) |
190 |
190 |
250 |
| Slide area (LRxFB) (mm) |
A |
2200X900 |
A |
2200X900 |
2900x1300 |
| B |
2500X900 |
B |
2500X900 |
| C |
2800X900 |
C |
2800X900 |
| D |
3100X900 |
D |
3100X900 |
| Slide plate thickness (mm) |
95 |
95 |
95 |
| Side opening (mm) |
900X600 |
900X600 |
900x700 |
| Main motor |
HPxP |
30X6 |
30X6 |
40x6 |
| KWxP |
22X6 |
22X6 |
30x6 |
| Slide adjusting motor |
HPxP |
2X4 |
2X4 |
3x4 |
| KWxP |
1.5X4 |
1.5X4 |
2.2x4 |
| Air pressure (kg/cm2) |
5 |
5 |
5 |
| Die cushion |
Type |
2-Pad-2-Cylinder |
| Capacity (ton) |
14X2 |
14X2 |
14x2 |
| Stroke length (mm) |
100 |
100 |
100 |
| Pad area (mm) |
640X470X2pcs |
640X470X2pcs |
640x470x2pcs |
